How to Quickly Set Up a Mail Server on CentOS 7 with Modoboa

Setting up a mail server on Linux from scratch is a pain in the neck. This tutorial is going to show you how to quickly set up your own email server on CentOS 7 with Modoboa, saving you lots of time and headaches. Modoboa is a free and open-source mail hosting and management platform designed to work with Postfix SMTP server and Dovecot IMAP/POP3 server.

Note: The latest version of Modoboa is a little buggy on CentOS 7. I recommend using iRedMail instead of Modoboa to set up the mail server on CentOS 7.

Modoboa is written in Python, released under the terms of ISC license. At the time of writing, the latest version is v1.15.0, released on May 7, 2020. Main features of Modoboa are as follows:

• Modoboa by default uses the Nginx web server to serve the webmail client and web-based admin panel.
• Compatible with Postfix and Dovecot.
• Supports MySQL/MariaDB, and PostgreSQL database.
• Easily create unlimited mailboxes and unlimited mail domains in a web-based admin panel.
• Easily create email alias in the web-based admin panel.
• The webmail client provides an easy-to-use message filter to help you organize messages to different folders.
• It can help you protect your domain reputation by monitoring email blacklists and generating DMARC reports, so your emails have a better chance to land in the inbox instead of the spam folder.
• Includes amavis frontend to block spam and detect virus in email.
• Calendar and address book.
• Integration with Let’s Encrypt to get a valid SSL/TLS certificate.
• A policy daemon for Postfix that allows you to define daily sending limits for domains and individual accounts.
• Includes AutoMX to allow end users to easily configure mail account in a desktop or mobile mail client.

Step 1: Choose the Right Hosting Provider and Buy a Domain Name

To set up a complete email server with Modoboa, you need a server with at least 3GB RAM, because after the installation, your server will use more than 2GB of RAM.

It is highly recommended that you install Modoboa on a clean install of CentOS 7 server.

This tutorial is done on a $9/month Kamatera VPS (virtual private server) with 1 CPU and 3GB RAM. They offer a 30-day free trial.

Kamatera is a very good option to run a mail server because

• They don’t block port 25, so you can send unlimited emails (transactional email and newsletters) without spending money on SMTP relay service. Kamatera doesn’t have any SMTP limits. You can send a million emails per day.
• The IP address isn’t on any email blacklist. (At least this is true in my case. I chose the Dallas data center.) You definitely don’t want to be listed on the dreaded Microsoft Outlook IP blacklist or the spamrats blacklist. Some blacklists block an entire IP range and you have no way to delist your IP address from this kind of blacklist.
• You can edit PTR record to improve email deliverability.
• They allow you to send newsletters to your email subscribers with no hourly limits or daily limits, whatsoever.
• You can order multiple IP addresses for a single server. This is very useful for folks who need to send a large volume of emails. You can spread email traffic on multiple IP addresses to achieve better email deliverability.

Other VPS providers like DigitalOcean blocks port 25. DigitalOcean would not unblock port 25, so you will need to set up SMTP relay to bypass blocking, which can cost you additional money. If you use Vultr VPS, then port 25 is blocked by default. They can unblock it if you open a support ticket, but they may block it again at any time if they decide your email sending activity is not allowed. Vultr actually may re-block it if you use their servers to send newsletters.

Go to Kamatera website to create an account, then create your server in your account dashboard.

I recommend following the tutorial linked below to properly set up your Linux VPS server on Kamatera.

• How to Create a Linux VPS Server on Kamatera

Once you created a server, Kamatera will send you an email with the server SSH login details. To log into your server, you use an SSH client. If you are using Linux or macOS on your computer, then simply open up a terminal window and run the following command to log into your server. Replace 12.34.56.78 with your server’s IP address.

ssh [email protected]

You will be asked to enter the password.

You also need a domain name. I registered my domain name from NameCheap because the price is low and they give whois privacy protection free for life.

Step 2: Creating MX Record and A Record in DNS

The MX record specifies which host or hosts handle emails for a particular domain name. For example, the host that handles emails for linuxbabe.com is mail.linuxbabe.com. If someone with a Gmail account sends an email to [email protected], then Gmail server will query the MX record of linuxbabe.com. When it finds out that mail.linuxbabe.com is responsible for accepting email, it then query the A record of mail.linuxbabe.com to get the IP address, thus the email can be delivered.

You can log in to your domain registrar’s website (such as NameCheap) to create DNS records.

In your DNS manager, create a MX record for your domain name. Enter @ in the Name field to represent the main domain name, then enter mail.your-domain.com in the Value field.

Note: The hostname for MX record can not be an alias to another name. Also, It’s highly recommended that you use hostnames, rather than bare IP addresses for MX record.

Your DNS manager may require you to enter a preference value (aka priority value). It can be any number between 0 and 65,356. A small number has higher priority than a big number. You can enter 0 for your email server, or accept the default value.

After creating MX record, you also need to create an A record for mail.your-domain.com , so that it can be resolved to an IP address. If your server has IPv6 address, be sure to add AAAA record as well.

If you use Cloudflare DNS service, you should not enable the CDN feature when creating A record for your mail server. Cloudflare does not support SMTP proxy.

Step 3: Set up Mail Server on CentOS 7 with Modoboa Installer

Log into your server via SSH, then run the following command to update existing software packages.

sudo yum update -y

I strongly recommend creating a sudo user for managing your server rather than using the default root user to improve server security. Run the following command to create a user. Replace username with your preferred username.

sudo adduser username

Set a password for this user.

sudo passwd username

Add this user to the wheel group in order to use sudo.

sudo gpasswd -a username wheel

Switch to the new user.

su - username

Download modoboa installer from Github.

sudo yum install git -y 

git clone https://github.com/modoboa/modoboa-installer

Modoboa is written in Python. Run the following command to install the necessary Python software.

sudo yum install -y openssl-devel python-virtualenv python-pip python3-pip

sudo -H pip3 install pystache wheel django-braces

Then navigate to the modoboa-installer directory and create a configuration file. Replace example.com with your own domain name.

cd modoboa-installer

sudo ./run.py --stop-after-configfile-check example.com

Edit the configuration file installer.cfg with a command line text editor like nano.

sudo yum install -y nano

sudo nano installer.cfg

To obtain a valid SSL/TLS certificate from Let’s Encrypt for your mail server, in [certificate] section, change the value of type from self-signed to letsencrypt.

type = letsencrypt

And change the email address from [email protected] to your real email address, which will be used for account recovery and important notifications. You will not be able to obtain and install Let’s Encrypt certificate if you use the default email address.

By default, Modoboa installer will install PostgreSQL database server, as indicated by the following lines in the config file.

[database]
engine = postgres
host = 127.0.0.1
install = true

If you would like to use MariaDB database server, then change the engine from postgres to mysql. (Modoboa will install MariaDB instead of MySQL.)

To save the file in Nano text editor, press Ctrl+O, then press Enter to confirm. Press Ctrl+X to exit.

We need to change a package name from amavisd-new to amavis with the following command.

sed -i 's/amavisd-new/amavis/g' modoboa_installer/scripts/amavis.py

Create Amavis database schema.

cp modoboa_installer/scripts/files/amavis/amavis_mysql_2.11.X.sql modoboa_installer/scripts/files/amavis/amavis_mysql_2.12.X.sql

cp modoboa_installer/scripts/files/amavis/amavis_postgres_2.11.X.sql modoboa_installer/scripts/files/amavis/amavis_postgres_2.12.X.sql

Next, run the following commands to open port 80 and 443 in firewall, so we can access the web-based admin panel later.

sudo yum install -y firewalld

sudo systemctl start firewalld

sudo firewall-cmd --permanent --zone=public --add-service={ssh,http,https}

Reload firewall for the changes to take effect.

sudo systemctl reload firewalld

You should use a fully-qualified domain name (FQDN) as the hostname for your mail server, such as mail.example.com. Run the following command to set the hostname.

sudo hostnamectl set-hostname mail.example.com

We also need to verify if the DNS records are propagated to the Internet. Depending on which domain registrar you use, your DNS record might be propagated instantly, or it might take up to 24 hours to propagate. You can go to https://dnsmap.io, enter your mail server’s hostname (mail.example.com) to check DNS propagation status.

If your DNS record is propagated, run the following command to start the installation. (Please replace example.com with your main domain name such as linuxbabe.com. Do not use a sub-domain like mail.example.com in this command).

sudo ./run.py --interactive example.com

The installation process can take a while. It took 10 minutes on my server. If you see an error during the installation, you can use the --debug option to see more detailed output.

sudo ./run.py --interactive --debug example.com

After Modoboa finishes installation, you can log into the admin panel with username admin and password password.

If the web page is displaying the “An internal error occurred” message, it’s likely that SELinux is preventing Nginx from access files in /srv/modoboa/instance/ directory. Run the following command to grant permissions.

sudo chcon -t httpd_sys_content_t /srv/modoboa/instance/ -R

Once you are logged in, you should go to Admin -> Settings -> Profile to change the password.

Step 4: Adding Mailboxes in Modoboa Admin Panel

Please note that the default admin account isn’t an email account. It can only be used to administer the mail server. To send emails, you need to add mailboxes with the admin account.

Go to Domains tab and click Add button to add a new domain.

Then enter your main domain name in the Name field. It is highly recommended that you enable DKIM signing, which can help with your domain reputation. In Key selector filed, you can enter a random word like modoboa. Choose 2048 for the key length.

In the next screen, you can choose to create an admin account for this particular domain name. The SMTP protocol requires that a mail server should have a [email protected] address.

Click the Submit button and your domain name will be added in Modoboa.

To add email addresses, go to Domains tab and click your domain name.

Then click mailboxes.

Click Add button and choose Account.

Then choose Simple user as the role. Enter an email address in Username field and enter a password.

In the next screen, you can optionally create an alias for this email address.

After clicking the submit button, the email address is created.

Step 5: Sending Test Emails

Before sending test emails, we need to run the following commands to open the SMTP and IMAP related ports in the firewall.

sudo firewall-cmd --permanent --add-service={smtp,smtp-submission,smtps,imap,imaps}

Reload firewall for the changes to take effect.

sudo systemctl reload firewalld

To login to the Modoboa webmail, you need to log out the admin account first and then enter the credentials for the email address.

Once you are logged into Modoboa webmail, you can send a test email from your private email server to your other email address and vice versa.

Inbound emails will be delayed for a few minutes, because by default Modoboa enables greylisting, which tells other sending SMTP server to try again in a few minutes. This is useful to block spam. The following message in /var/log/maillog indicates greylisting is enabled.

postfix/postscreen[20995]: NOQUEUE: reject: RCPT from [34.209.113.130]:36980: 450 4.3.2 Service currently unavailable;

However, greylisting can be rather annoying. You can disable it by editing the Postfix main configuration file.

sudo nano /etc/postfix/main.cf

Find the following lines at the end of the file and comment them out. (Add a # character at the beginning of each line.)

postscreen_pipelining_enable = yes
postscreen_pipelining_action = enforce

postscreen_non_smtp_command_enable = yes
postscreen_non_smtp_command_action = enforce

postscreen_bare_newline_enable = yes
postscreen_bare_newline_action = enforce

Save and close the file. Then restart Postfix for the changes to take effect.

sudo systemctl restart postfix

Now you should be able to receive emails without waiting several minutes.

Checking if ClamAV is Running

ClamAV is used to scan viruses in email messages. ClamAV can use a fair amount of RAM. If there’s not enough RAM on your server, ClamAV won’t work properly, which will prevent your mail server from sending emails. You can check its status with:

systemctl status clamd@amavisd

If your ClamAV is always activating like below, you have a problem.

Check ClamAV logs.

sudo journalctl -eu clamd@amavisd

If you see the following error in the log,

LibClamAV Error: cli_loaddbdir(): No supported database files found in /var/lib/clamav

then you need to update the virus database with:

sudo freshclam

Now try to restart ClamAV.

sudo systemctl restart clamd@amavisd

Now check its log again.

sudo journalctl -eu clamd@amavisd

If you see the following line in the logs, that means your server doesn’t have enough RAM to run ClamAV.

daemonize() failed: Cannot allocate memory

You can add a swap file to your server to increase the total RAM on your server. (Note that using swap space on the server can greatly degrade server performance. If you want better performance, you should upgrade the physical RAM instead of using swap space.)

To add swap space on the server, first, use the fallocate command to create a file. For example, create a file named swapfile with 1G capacity in root file system:

sudo fallocate -l 1G /swapfile

Then make sure only root can read and write to it.

sudo chmod 600 /swapfile

Format it to swap:

sudo mkswap /swapfile

Output:

Setting up swapspace version 1, size = 1024 MiB (536866816 bytes)
no label, UUID=0aab5886-4dfb-40d4-920d-fb1115c67433

Enable the swap file

sudo swapon /swapfile

Now your ClamAV should be active (running), and it won’t prevent your mail server from sending emails.

systemctl status clamd@amavisd

To mount the swap space at system boot time, edit the /etc/fstab file.

sudo nano /etc/fstab

Add the following line at the bottom of this file.

/swapfile    swap    swap     defaults    0   0

Save and close the file. Then reload systemd.

sudo systemctl daemon-reload

Step 6: Checking If Port 25 (outbound) is blocked

Your ISP or hosting provider won’t block incoming connection to port 25 of your server, which means you can receive emails from other mail servers. However, many ISP/hosting providers block outgoing connection to port 25 of other mail servers, which means you can’t send emails.

If your email didn’t arrive at your other email address such as Gmail, then run the following command on your mail server to check if port 25 (outbound) is blocked.

telnet gmail-smtp-in.l.google.com 25

If it’s not blocked, you would see messages like below, which indicates a connection is successfully established. (Hint: Type in quit and press Enter to close the connection.)

Trying 74.125.68.26...
Connected to gmail-smtp-in.l.google.com.
Escape character is '^]'.
220 mx.google.com ESMTP y22si1641751pll.208 - gsmtp

If port 25 (outbound) is blocked, you would see something like:

Trying 2607:f8b0:400e:c06::1a...
Trying 74.125.195.27...
telnet: Unable to connect to remote host: Connection timed out

In this case, your Postfix can’t send emails to other SMTP servers. Ask your ISP/hosting provider to open it for you. If they refuse your request, you need to set up SMTP relay to bypass port 25 blocking.

Step 7: Using Mail Clients on Your Computer or Mobile Device

Fire up your desktop email client such as Mozilla Thunderbird and add a mail account.

• In the incoming server section, select IMAP protocol, enter mail.your-domain.com as the server name, choose port 143 and STARTTLS. Choose normal password as the authentication method.
• In the outgoing section, select SMTP protocol, enter mail.your-domain.com as the server name, choose port 587 and STARTTLS. Choose normal password as the authentication method.

You can also use IMAP on port 993 with SSL/TLS encryption.

Step 8: Improving Email Deliverability

To prevent your emails from being flagged as spam, you should set PTR, SPF, DKIM and DMARC records.

PTR record

A pointer record, or PTR record, maps an IP address to a FQDN (fully qualified domain name). It’s the counterpart to the A record and is used for reverse DNS lookup, which can help with blocking spammers. Many SMTP servers reject emails if no PTR record is found for the sending server.

To check the PTR record for an IP address, run this command:

dig -x IP-address +short

or

host IP-address

PTR record isn’t managed by your domain registrar. It’s managed by the organization that gives you an IP address. Because you get IP address from your hosting provider or ISP, not from your domain registrar, so you must set PTR record for your IP in the control panel of your hosting provider or ask your ISP. Its value should be your mail server’s hostname: mail.your-domain.com. If your server uses IPv6 address, be sure to add a PTR record for your IPv6 address as well.

To edit the reverse DNS record for your Kamatera VPS, log into the Kamatera client area, then open a support ticket and tell them to add PTR record for your server IP addresss to point the IP address to mail.your-domain.com. It’s not convenient, you might think, but this is to keep spammers away from the platform, so legitimate email senders like us will have a great IP reputation.

SPF Record

SPF (Sender Policy Framework) record specifies which hosts or IP address are allowed to send emails on behalf of a domain. You should allow only your own email server or your ISP’s server to send emails for your domain. In your DNS management interface, create a new TXT record like below.

Explanation:

• TXT indicates this is a TXT record.
• Enter @ in the name field to represent the main domain name.
• v=spf1 indicates this is a SPF record and the version is SPF1.
• mx means all hosts listed in the MX records are allowed to send emails for your domain and all other hosts are disallowed.
• ~all indicates that emails from your domain should only come from hosts specified in the SPF record. Emails that are from other hosts will be flagged as forged.

To check if your SPF record is propagated to the public Internet, you can use the dig utility on your Linux machine like below:

dig your-domain.com txt

The txt option tells dig that we only want to query TXT records.

DKIM Record

DKIM (DomainKeys Identified Mail) uses a private key to digitally sign emails sent from your domain. Receiving SMTP servers verify the signature by using the public key, which is published in the DNS DKIM record.

When we were adding domain name in Moboboa admin panel earlier, we enabled DKIM signing, so the signing part is taken care of. The only thing left to do is creating DKIM record in DNS manager. First go to Modoboa admin panel as the admin user and select your domain name. In the DNS section, click Show key button.

The public key will be revealed. There are two formats. We only need the Bind/named format.

Go to your DNS manager, create a TXT record, enter modoboa._domainkey in the Name field. (Recall that we used modoboa as the selector when adding domain name in the admin panel.) Copy everything in the parentheses and paste into the value field. Delete all double quotes. Your DNS manager may require you to delete other invalid characters, such as carriage return.

Note that your DKIM record may need sometime to propagate to the Internet. Depending on the domain registrar you use, your DNS record might be propagated instantly, or it might take up to 24 hours to propagate. You can go to https://www.dmarcanalyzer.com/dkim/dkim-check/, enter modoboa as the selector and enter your domain name to check DKIM record propagation.

DMARC Record

DMARC stands for Domain-based Message Authentication, Reporting and Conformance. DMARC can help receiving email servers to identify legitimate emails and prevent your domain name from being used by email spoofing.

To create a DMARC record, go to your DNS manager and add a TXT record. In the name field, enter _dmarc. In the value field, enter the following:

v=DMARC1; p=none; pct=100; rua=mailto:[email protected]

The above DMARC record is a safe starting point. To see the full explanation of DMARC, please check the following article.

• Creating DMARC Record to Protect Your Domain Name From Email Spoofing

Step 9: Testing Email Score and Placement

After creating PTR, SPF, DKIM record, go to https://www.mail-tester.com. You will see a unique email address. Send an email from your domain to this address and then check your score. As you can see, I got a perfect score.

Mail-tester.com can only show you a sender score. There’s another service called GlockApps that allow you to check if your email is placed in the recipient’s inbox or spam folder, or rejected outright. It supports many popular email providers like Gmail, Outlook, Hotmail, YahooMail, iCloud mail, etc

Email is Rejected by Microsoft Mailbox?

Microsoft uses an internal blacklist that blocks many legitimate IP addresses. If your emails are rejected by Outlook or Hotmail, you need to follow the tutorial linked below to bypass Microsoft Outlook blacklist.

• How to Bypass the Microsoft Outlook Blacklist & Other Blacklists

What if Your Emails Are Still Being Marked as Spam?

I have more tips for you in this article: How to stop your emails being marked as spam. Although it requires some time and effort, your emails will eventually be placed in inbox after applying these tips.

Auto-Renew Let’s Encrypt TLS Certificate

Modoboa installed the latest version of Let’s Encrypt client (certbot) as /opt/certbot-auto. Let’s Encrypt TLS certificate is valid for 90 days. To automatically renew the certificate, edit root user’s crontab file.

sudo crontab -e

Add the following line at the end of this file.

@daily /opt/certbot-auto renew -q && systemctl reload nginx postfix dovecot

Save and close the file. This tells Cron to run the certbot renew command every day. If the certificate has 30 days left, certbot will renew it. It’s necessary to reload Nginx web server, Postfix SMTP server and Dovecot IMAP server so they can pick up the new certificate.

Enabling SMTPS Port 465

If you are going to use Microsoft Outlook client, then you need to enable SMTPS port 465 in Postfix SMTP server.

Troubleshooting

First, please use a VPS with at least 2GB RAM. Running Modoboa on a 1GB RAM VPS will cause the database, SpamAssassin, or ClamAV to be killed because of out-of-memory problem. If you really want to use a 1GB RAM VPS, you are going to lose incoming emails and have other undesirable outcomes.

If the Modoboa web interface isn’t accessible, like a 502 gateway error, you should check the Nginx logs in /var/log/nginx/ directory to find clues. You may also want to check the mail log /var/log/maillog.

Check if the various services are running.

systemctl status postfix

systemctl status dovecot

systemctl status nginx

systemctl status mariadb

systemctl status clamd@amavisd

systemctl status amavisd

I found that the clamav-daemon service has a tendency to stop without clear reason even when there’s enough RAM. This will delay emails for 1 minute. We can configure it to automatically restart if it stops via the systemd service unit. Copy the original service unit file to the /etc/systemd/system/ directory.

sudo cp /lib/systemd/system/clamav-daemon.service /etc/systemd/system/clamav-daemon.service

Then edit the service unit file.

sudo nano /etc/systemd/system/clamav-daemon.service

Add the following two lines in the [service] section.

Restart=always
RestartSec=3

Like this:

[Service]
ExecStart=/usr/sbin/clamd --foreground=true
# Reload the database
ExecReload=/bin/kill -USR2 $MAINPID
StandardOutput=syslog
Restart=always
RestartSec=3

Save and close the file. Then reload systemd and restart clamav-daemon.service.

sudo systemctl daemon-reload
sudo systemctl restart clamav-daemon

(Optional) Set Up Autodiscover and AutoConfig to Automate Mail Client Configuration

Autodiscover and AutoConfig make it easy to configure a desktop or mobile mail client. The end user just need to enter a name, email address and password to set up his/her mail account, without having to enter the SMTP or IMAP server details. Autodiscover is supported by Microsoft Outlook mail client and AutoConfig is supported by Mozilla Thunderbird mail client.

Modoboa uses AutoMX to implement this feature on your mail server. All we need to do now is add CNAME records in DNS. In your DNS manager, create two CNAME records.

autoconfig.yourdomain.com       CNAME         mail.yourdomain.com
autodiscover.yourdomain.com     CNAME         mail.yourdomain.com

Go to the Domains tab in your Modoboa admin panel, if the autoconfig is in green, that means your CNAME records are correct. (Modoboa checks DNS records for your mail server every 30 minutes, so you might need to wait some time for autoconfig to turn green.)

Once the CNAME records are propagated to Internet, you don’t have to enter the SMTP or IMAP server details when setting up mail account in Microsoft Outlook and Mozilla Thunderbird.

Host Multiple Domains in Modoboa

See the following article:

• How to Host Multiple Domains in Modoboa Mail Server

For Advanced Users

You may want to customize the SpamAssassin content filter to better detect spam.

• Block Email Spam By Checking Header and Body in Postfix/SpamAssassin

If your website and mail server are running on two different VPS (virtual private server), you can set up SMTP relay between your website and mail server, so that your website can send emails through your mail server. See the following article.

• Set up SMTP relay between 2 Postfix SMTP servers on CentOS/RHEL

Wrapping Up

I hope this tutorial helped you set up a mail server on CentOS 7 with Modoboa. As always, if you found this post useful, then subscribe to our free newsletter to get more tips and tricks. Take care 🙂